환경 신뢰성 테스트 챔버

• 대용량: 광범위한 테스트 요구 사항을 위한 45m³의 유효 부피.
• 넓은 범위: 온도 편차: 0°C에 +90°C; 습도: 20%–98% RH.
• 정밀 제어 : ± 1 ° C 온도 변동, ± 2.5 % RH 습도 변동.
• 내구성 있는 디자인: 최대 2000KG/m²를 지원하며 미끄럼 방지 바닥재와 중장비 트랙 카를 갖추고 있습니다.
• 표준 준수: 여러 국제 환경 테스트 표준을 충족합니다.

• 넓은 온도 및 습도 범위: -40°C에서 +150°C, 습도 20%-98% RH.
• 고정밀 제어 : 온도 변동 ± 0.5 °C, 습도 변동 ± 2.5 % RH.
• 다양한 크기 사용 가능: 소형 80L에서 대용량 1000L 모델까지.
• 국제 표준 준수: GB/T 및 IEC 환경 테스트 표준을 지원합니다.
• 에너지 효율 및 조용한 작동: 소음 수준 ≤75dB.
• 내구성 있는 재료: 오래 지속되는 신뢰성을 위한 SUS304# 스테인리스 스틸 내부.

This equipment is suitable for all kinds of electrical and electronic products and other products, parts and materials to carry out high and low temperature constant and gradual change, humidity and heat test and other environmental simulation reliability test.

other uses may cause injury to personnel and damage to equipment.

Sample limit

Testing and storage of samples of flam mable。

In addition to testing the adaptability and the characteristics of the product had been changed under the general conditions of temperature and humidity combination (High-low temperature & storage, temperature cycling, high temperature and high humidity or moisture condensation test) by simulatable products, low humidity and constant temperature-humidity test chamber can also test whether the crazing and breakage of the product would happen under the conditions of low temperature and low humidity, high temperature and low humidity, high temperature and high humidity, low temperature and high humidity. Further more, the static content in air under the low humidity condition is many time more than the general condition, and it is said that most damage of the electronic components is caused by static.
Meeting the requirements of international specification test (IEC, JIS. JB, MIL...) to ensure the consistency of international measurement programs (including testing procedures, conditions and methods) to avoid cognitive differences and reduces the measurement uncertainties.

High and low temperature test chamber applying to electrical engineering, electronic products, components and the adaptive test of materials during storage, transportation and use in high and low temperature.

Designed for a variety of electronic products machine high and low temperature and humidity test, LED, PCB and other products aging test, special requirements can be customized, such as low-temperature and low-humidity test recognized: 3 ℃/10% RH; 2, 5C/10% RH, etc., the size of the inner box to accept customized, temperature and humidity Fan to accept customized. Laboratory floor load-bearing capacity: 600kg/m2 (uniform load) made of fully welded stainless steel SUS304 non-slip plate.

Thermal Shock Test Chamber is designed to test the material structure or composite materials, in the instant after the extremely high temperature and extremely low temperature under the continuous degree of tolerance, in order to test in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage. To be tested completely static test mode is the current electronic parts testing, research, and semiconductor production line with a large number of screening, can save a lot of consumables testing costs. Fast operation and high reliability. Suitable for metal, plastic, rubber, electronics, aerospace .... Material testing.

Designed for all kinds of electrical and electronic, automotive, metal, plastic, chemical, aerospace, medical building materials and other products, parts and materials for high and low temperature constant and gradual change of hot and humid test and other environmental simulation reliability test.

염수 분무 시험기는 도장, 코팅, 도금 및 아노다이징 후 다양한 재료의 표면 내식성을 테스트하도록 설계되었습니다.

시험 기준
GB/T5170.8, GB/T2423.17, ISO-376837693770, ASTM-B117B268, JIS-DO201H8502 H8610K5400Z2371